The questions we hear most often from architects, builders, and homeowners about ordering, installing, and specifying Cooper Stone limestone thin veneer. Click any question to expand the answer.
Limestone thin veneer is real quarried limestone cut to roughly 1 inch to 1.5 inches thick. It has the same natural face as traditional full-bed stone, but because it's thinner, the installed wall is significantly lighter and does not require an extended foundation. Flats are sold by the square foot, corners by the linear foot.
Cooper Stone limestone thin veneer is typically 1 inch to 1.5 inches thick. Full-bed stone from the same quarry is 3 inches to 5 inches thick. Both are available in the full lineup of Cooper Stone limestones including Austin White, Castle Grey, Antique, Cordova Cream, and Cavestone.
In most residential applications, no. Thin veneer is light enough to install over properly prepared framing and sheathing with a weather-resistive barrier, metal lath, and a scratch coat. Full-bed stone, by contrast, typically requires an extended concrete ledge to carry its weight. Always verify with your local building code before installation.
Cooper Stone limestone thin veneer typically weighs about 12 to 15 pounds per square foot installed. That's roughly a third of the weight of full-bed limestone, which runs about 40 to 55 pounds per square foot depending on thickness.
Flats are sold by the square foot. Corners are sold by the linear foot. For ordering purposes, count the square footage of wall face plus the linear footage of outside corners. Cooper Stone's team can review drawings and help estimate the right quantities for your project.
Cooper Stone limestone thin veneer corners are typically 8 to 12 inches on the long leg and 3 to 5 inches on the return. Masons alternate long-leg and short-leg orientation up the course so the completed wall reads with the depth of full-bed stone.
Yes. Cooper Stone limestone products are tested per ASTM C-119 and conform to ASTM C568 for dimension limestone. Published values for water absorption, density, modulus of rupture, and compressive strength are available on the spec sheet for each stone.
The core difference is thickness. Thin veneer is 1 to 1.5 inches thick and installs like cladding over framing. Full-bed is 3 to 5 inches thick and installs like traditional masonry on a stone ledge. Thin veneer is lighter, faster to install, and usually the lower total installed cost on new residential construction. Full-bed is required for retaining walls, columns, and anywhere real stone depth is needed.
In many cases, yes, provided the existing surface is sound and can hold a scratch coat. The usual approach is to attach metal lath directly into the substrate (through the brick or stucco into the backing structure), apply a scratch coat, and set stone normally. A structural review is a good idea before adding dead load to any existing wall.
All Cooper Stone limestones are quarried in Texas, with the main Cooper Stone quarry located at 3786 W FM 487 in Jarrell, Texas. The company has been quarrying and selling natural stone and crushed aggregates since 1972.
Every stone in Cooper Stone's Traditional collection is available as thin veneer. The most-specified colors across the Austin, Dallas, Houston, and San Antonio markets are Austin White (cream-white), Castle Grey (cool grey Lueders), Antique (aged cream-buff), Cordova Cream, Cavestone, Rattlesnake Chop, Rusted Earth, and French Chateau. See the full lineup on the Traditional collection page.
Yes. Cooper Stone delivers limestone thin veneer throughout Texas and ships nationwide. Scheduled truck routes run multiple times per week to Austin, Dallas, Fort Worth, Houston, San Antonio, Waco, Georgetown, Round Rock, San Marcos, New Braunfels, and the Hill Country, plus coast-to-coast national freight for qualifying orders.
Call the Cooper Stone quarry at (512) 746-2210, email info@cooperstone.com, or use the Order Samples form on the website. Samples are free and typically ship within a few business days.
Yes. Cooper Stone's shop can cut dimensional pieces to specification, including wall caps, sills, headers, hearth stones, and custom architectural elements. Contact the quarry with drawings or dimensions.
Cooper Stone publishes a step-by-step install guide covering substrate prep, weather-resistive barrier, metal lath, scratch coat, setting bed, placement, corners, pointing, and finishing. For code-specific requirements, always follow your local jurisdiction and the Natural Stone Institute's thin veneer installation guide.
The team in Jarrell has been quarrying Texas limestone since 1972 and is happy to answer project-specific questions, review drawings, or send samples.